US Overseas warehouse: 3-5 Business days
YunExpress: 4-7 Business days
UK / FR / HK: 3-5 Business days
JPY / KR: 4-7 Business days
SG/ DE: 5-8 Business days
NL / PL / SW : 6-8 Business days
AU / SWE / RON: 6-10 Business days
CA/NO: 8-10 Business days
More detail please click Shipping Policy
Model Number: M03
Acasis USB-C NVMe M.2 Dual-Bay Offline Cloner 10Gbp for Key M, AC-M03
Off-Line Cloning ，Fast Heat Dissipation，Unique shape
Dimensions and Weight
Length: 84 mm / 3.31 in
Width: 49 mm / 1.93 in
Height: 16 mm / 0.63 in
Weight: 388 g / 13.7 oz
Hardware Interface：Solid State Drive, PCI
Memory Storage Capacity：8 TB
Transmission Speed：10Gbps(Theoretical speed)
Compatibility：M Key & (M+B) Key
USB Interface：USB3.2 Gen2
Not support SATA SSDs.
The capacity of Target SSD needs Larger than the source SSD(Target>Source).
Offline cloning does not allow connection to a computer
Make sure that both SSDs can be recognized on your computer before cloning.
Scan both SSDs before cloning to make sure there are no bad sectors since bad sectors will disrupt cloning.
【Incredible Performance】This product is a dual-bay enclosure and also an offline cloner. Read and write two SSDs at the same time. Support single SSD with a capacity of up to 8TB. Compatible only with PCIe NVMe M key / B+M key SSDs.
【Offline Duplication】This Acasis NVMe M.2 Dual-Bay Offline Cloner allows you to clone an SSD to another quickly without a PC. Note that the actual capacity of the target SSD has to be larger than that of the source SSD.
【Ultra-Fast Speed】USB 3.2 interface ensures fast data transfer in a flash speed up to 10Gbps. According to the ACASIS Lab, R/W speeds can reach up to 1041MB/S and 1034MB/S respectively, with less time wasted for improved efficiency.
【100% Tool-Free】SSD can be easily installed and removed without any tools, ideal to take anywhere for on-the-go tasks. Plug and play, no drivers required.
● Check if your SSD interface is clean before inserting into slot.
● Insert and remove your SSD carefully only when the power is off.
● Do not tilt or bend your SSD during its installation or removal. Never force it into the slot.
● When using or duplicating a drive, especially a large one, it's best to use with a cooling fan for better heat dissipation.
● A brand new SSD needs to be formatted and initialized on the computer before it can be used.
[ACASIS NVMe M.2 Duplicator]
It functions greatly as an Offline NVMe M.2 Duplicator to clone important data between 2 SSDs quickly without a computer, and can be used as a Dual-Bay NVMe Docking Station to help expand storage capacity with an SSD or two.NOT support SATA ssds.Do not support NVME drives with heatsink attached.
[Friendly Humanized Design]
ACASIS versatile M.2 NVMe duplicator support Smooth plug and unplug. No need to use any tools or screws. Adopted Aluminum alloy material design, can quickly dissipate heat and protects the hard disk when in use.
Support NVMe M.2 M/B&M Key SSDs in sizes: 2230/2242/2260/2280. Compatible with multiple operating systems, such as Windows, macOS and Linux.
[High Speed and Performance]
This dual-bay nvme duplicator drive enclosure enables 10Gbps super speed data transfer, with 992Mb/s write/read speeds for most M2.NVME SSDs. It took about 4 minutes to clone a 256GB m.2 SSD to a 2TB one as tested.Support an SSD with capacity up to 8TB.
[Easy M2 SSD Offline Cloner]
An easy clone, without the burden of having go use a computer to do so. Just plug the two M2.NVME SSDs in and hooked up the power,click the ‘Clone’ button for 3-5 seconds to quickly clone all files from ‘A’ SSD to ‘B’ SSD, there are LED status indicators and the process completed quickly. NOTES: make sure the capacity of target M.2 NVME ssd larger than original M.2 NVME ssd.
Q1:Why do four clone indicators remain off after pressing the clone button?
A1:Please kindly check if the enclosure is connected to a device. If so, this button will not work. It just support offline clone. Plug the two nvme SSD in right place then connect the power adapter, click clone button,then will start clone.
Q2:After cloning started, 25% clone indicator was on but source/target SSD indicators are off?
A2:Please make sure the capacity of the target SSD needs to be larger than the source SSD or it won't clone successfully.
Q3:Will it get hot during the use?
A3:The shell of this enclosure is made of aluminum alloy, which will dissipate the heat effectively. If the shell gets hot during the use, that means the heat of the SSD(s) has been transferred for better protection, which is a normal phenomenon.
Q4:Can I use with only a slot of this enclosure?
A4:Yes, you can use a single slot for data transfer and storage of an NVMe SSD. Of course, you can also use 2 slots for this function on 2 NVMe SSDs.